Packing materials: Remove the stickers and other packing materials from the 123.hp.com 4520 printer. 123.hp.com/setup 4520
Power cord & Accessories: In the printer’s carton, you will find an installation CD-ROM, setup cartridges, and a power cord.
Set your Preferences: Fix the power cord into the printer and turn it on. Select your region & preferred language on the control panel and tap Yes to confirm your preferences.
Load Papers: Open the paper tray and extend the guides. Load high-quality paper into it.
Install the HP ink: Wait until the printhead alignment process is complete and open the cartridge access door. Unpack up ink cartridge and remove the protective tape from it. Insert the color cartridge into the left slot and the black cartridge into the right.
Print an Alignment Page: As soon as you install the ink cartridges into the respective slots, the 123.hp.com/envy4520 printer prints an alignment page.
Choose a connection method: If you want to establish a wireless connection, connect the 123.hp.com/envy4520 printer to your Wi-Fi network. If you do not have access to Wi-Fi network, perform the USB cable setup.
Download the HP Software: Click the link given on this site to download the full-featured driver for your printer on your computer.
Install the HP Software: Once the downloading process is complete, launch the installer and complete the installation process.
Print a sample page: Now that you have installed your 123.hp.com/setup 4520 printer successfully, open an image or document and try to print it.
How to Setup and Configure the Home Router
The initial step is to connect your router to the modem with the help of an Ethernet cable.
The modem should be associated with the WAN port or Internet port of the router.
If you want to connect any devices, then use an Ethernet cable to do the same.
You can connect devices such as computers, games consoles, etc.
To configure your router settings, you should connect at least one computer to it.
The succeeding step is to register the Mac address to the ISP’s website
Visit the ISP’s website and change the MAC address using the Update Mac Address option.
Once you carry out the above-given instructions given for router support, you can connect your router to the Wi-Fi using the Web Services page.
How to Configure Router
How to Configure Router on a Stick
Configuring a router on a stick can be slightly complicated, so follow the below-mentioned steps carefully to complete the setup process.
The initial step is to connect all the devices. Do this with the help of Ethernet cable.
Next, you should configure the IP address on the PC and the server using DHCP.
The succeeding step is to configure the VLANs on the switch associated with the network.
The VLANs should be created on layer 2 of the switch. 123 hp com setup4520
The Switch interface has to be applied to the VLAN in order to set it to Access mode.
You should confirm routing between VLANs after configuring the Sub-Interfaces on the router.